Prep Seal- Oil Spot Primer

Unit of Sale: 1 Gallon Jug
Prep Seal is a ready to use polymer based emulsion designed to seal oil, grease, and gasoline spots or stain prior to the application of pavement sealers over asphalt surfaces. Prep Seal helps prevent oil and gas from bleeding up through freshly applied asphalt or coal tar based pavement sealer.

Surface Preperations:
Scrape, wire brush, or burn off excessive build-up of oil, grease, and gasoline.

Application: Stir throughly. DO NOT DILUTE.
Apply with brush, roller or spray.
A small amount of sand may be broadcast onto wet Prep Seal. Once dry, this will help create an improved mechanical bond between the Prep Seal and the pavement sealer. Allow Prep Seal to dry completely before applying pavement sealers.

One gallon of Prep Seal will cover approximately 150-200 square feet.
Coverage rates may vary due to pavement porosity and method of application.

Note: Temperatures must be above 50°F both during application and for a period of at least 24 hours after application. Do not apply when rain is imminent or forecast.

Prep Seal- Oil Spot Primer